Products For Sale

15quart fuel tanks. Used in the factory for testing. $190 new. Red ones were gas and black ones were oil holders. Some have one port and some have two.

1500lbs winch for augers and conveyors. Replaces the Fulton 1500. Better crank arm which reduces fatigue. Standard mount plate.

Upper gearbox for 13in swinghoppers to 2004. Westfield mk and wheatheart sa series.1.25in vertical shaft and 1.75in hrizontal shaft.

Lower gear for early version swinghopper augers til 2004. westfield mk13 series and wheatheart sa13 series. Vertical splined shaft and 1.25in horizontal shaft.

Heavy duty gearbox with 1 3\8in shafts. 1 to 1 ratio. Shafts run ccw to each other. Both shafts smooth wiith square key slots.

Hyd powerswing for 13in auger swinghoppers. Height adjustable. Has hose and control valve.

Shaft mount hubs for duals 4in diameter. Came off jd4640. All pieces functionally and ready. 4 hubs available.

8in poly bucket spout. Round seal plate with 4 drop buckets. Secured with a strong canvas strap.

55r weasler pto 540 half. This is the single shear bolt version used on earlier series. Such as sa1381 or mk1381 augers. The Yellow version pto is identical to the green except that it has 2 shear bolts.

Remote controlled light with magnet holder. For the bs1 Electric powerswing series.

Drive drum for a 2400 series batco conveyor. sdrive location. 10.5in vulcanized cover. 24in wide.

Sliding jaw clutch for 6, 8, 10in bin unload powersweeps. Type C.

Intake boot bearing assembly for mkx2 13 and hx2 13 AGI swinghopper augers. Full assembly that is ready to bolt into place.

16in pivot Flight for a 16in low profile hopper.

Intake cage for a 4in auger. No intake bushing.

8in intake hopper for a utility auger. Has 1.25in bearing for shaft holding. Has optional top lid and feeding guide. Available in painted red and silver. Silver version does not have the feeding guide.

Intake cage for a hutchinson or mayrath 6in auger. Can basically fit any brand of 6in auger. 1in bushing at the base end.

sweep wheel for hutchinson bin powersweeps. Has reduction drive.

540 pto with 1in keyed bore. telescoping shaft. Common on many small augers, mixers, etc.

Bolt on metal hopper for 8in harvest international 8in topdrive auger. New.

Extendable 540 pto. 60 to 84in. Shaft yoke is 1.25in round with quarter keyway. Very common 14 series pto used in most brands of augers, etc.

Drive head gearbox for hutchinson and mayrath legacy topdrive augers. Ships without 80\90 oil. 8in.

Drive head for Hutchinson and Mayrath legacy topdrive augers. Ships without 80\90 oil. 10in

Series 2 ujoint mainly used in 2023 low pro hoppers and newer. Has greasezirk. One end has 1000rpm and the other end has a 1in shaft with keyway.